CBSE Class 10 Science Question Paper 2025 Set 1 (31/4/1) with Solutions

Reading Time: 42 minutes

Last Updated on November 17, 2026 by XAM CONTENT

CBSE Class 10 Science Previous Year Paper

Practice the CBSE Class 10 Science Question Paper 2025 — Delhi Set 1 (31/4/1) with complete section-wise answers and worked solutions. The paper contains 39 questions for 80 marks with internal choices in selected questions.

Paper Code
31/4/1
Maximum Marks
80
Time
3 Hours
Paper Pattern

Section A: Q1–20 (1 mark each) · Section B: Q21–26 (2 marks each) · Section C: Q27–33 (3 marks each) · Section D: Q34–36 (5 marks each) · Section E: Q37–39 (4 marks each). There is no overall choice; internal choice is provided in selected questions.

🧪
CBSE Science 2025 · 31/4/1

Section A — MCQs & Assertion–Reason

Questions 1–20 · 1 mark each
20
MCQ / A-R
🧪
Section A — MCQs & Assertion–Reason
Questions 1–20 · 1 mark each
1

In which one of the following situations a chemical reaction does not occur?

[1 mark]
AMilk is left open at room temperature during summer
BGrapes get fermented
CAn iron nail is left exposed to humid atmosphere
DMelting of glaciers
Solution

Ans. (d)

Explanation: The melting of glaciers is a physical change in which ice is converted into water, only a solid state is changed into a liquid state.

2

In order to prepare dry hydrogen chloride gas in humid atmosphere the gas produced is passed through a guard tube (drying tube) which contains:

[1 mark]
ACalcium chloride
BCalcium oxide
CCalcium hydroxide
DCalcium carbonate
Solution

Ans. (a)

Explanation: Calcium chloride is used as an absorbent in the guard tube which can absorb moisture present in the air.

3

The property by virtue of which a solid material can be drawn into thin wires is called:

[1 mark]
Amalleability
Bductility
Crigidity
Dresistivity
Solution

Ans. (b)

Explanation: Ductility is the physical property of a metal which means that metal can stretch rather than break.

4

Select from the following a hydrocarbon having one C-C bond and one \(\mathrm{C} \equiv \mathrm{C}\) bond:

[1 mark]
ABenzene
BCyclohexane
CButyne
DPropyne
Solution

Ans. (d)

Explanation: Propyne contains three carbons. Carbon 1 and Carbon 2 are attached through a triple bond and carbon 2 and carbon 3 are attached through a single bond.

5

The essential element taken up from the soil by the plants to synthesise proteins is:

[1 mark]
APhosphorus
BNitrogen
CIron
DMagnesium
Solution

Ans. (b)

Explanation: Nitrogen is an essential nutrient that plants absorb from the soil in the form of nitrates \(\left(\mathrm{NO}_{3}{ }^{-}\right)\)or ammonium \(\left(\mathrm{NH}_{4}{ }^{+}\right)\). It is a key component of amino acids, which are the building blocks of proteins.

6

Select TRUE statements about lymph from the following:

(A.) Lymph vessels carry lymph through the body and finally open into larger arteries.

(B.) Lymph contains some amount of plasma, proteins and blood cells.

(C.) Lymph contains some amount of plasma, proteins and red blood cells.

(D.) Lymph vessels carry lymph through the body and finally open into larger veins.

The true statements are:

[1 mark]
AA and B
BB and D
CA and C
DC and D
Solution

Ans. (b)

Explanation: Lymph contains some amount of plasma, proteins and white blood cells (mainly lymphocytes) that help in immune defence. However, red blood cells (RBCs) are absent. Lymph from the intercellular spaces enters the lymphatic capillaries, which merge to form larger lymph vessels that eventually drain into larger veins.

7

Plants like rose and banana have lost the capacity to produce:

[1 mark]
Aflowers
Bbuds
Cseeds
Dfruits
Solution

Ans. (c)

Explanation: Plants like roses and bananas have lost the ability to produce seeds for reproduction. Instead, they reproduce through vegetative propagation. Roses are commonly propagated using stem cuttings or grafting, where a part of the plant is used to grow a new one. Bananas reproduce through underground rhizomes or suckers, as most cultivated banana varieties are sterile and do not produce viable seeds.

8

In a bisexual flower the male gametes are present in the:

[1 mark]
Aanther
Bovary
Cstigma
Dfilament
Solution

Ans. (a)

Explanation: In a bisexual flower, male gametes are present in the pollen grains, which are produced by the anthers of the stamen.

9

When a pure-tall pea plant is crossed with a pure-dwarf pea plant, the percentage of tall pea plants in \(\mathrm{F}_{1}\) and \(\mathrm{F}_{2}\) generation pea plants will be respectively:

[1 mark]
A100%; 25%
B100%; 50%
C100%; 75%
D100%: 100%
Solution

Ans. (c)

Explanation: When a pure tall (TT) plant is crossed with a pure dwarf (tt) plant, all \(\mathrm{F}_{1}\) offspring have the

genotype Tt (heterozygous tall) and because T (tall) is dominant, 100% of the plants in \(\mathrm{F}_{1}\) are tall. When \(\mathrm{F}_{1}\) plants are self-crossed (Tt × Tt), the plants in \(\mathrm{F}_{2}\) are 75% Tall (TT and Tt) and 25% Dwarf (tt).

10

To get an image of magnification -1 on a screen using a lens of focal length 20 cm, the object distance must be:

[1 mark]
ALess than 20 cm
B30 cm
C40 cm
D80 cm
Solution

Ans. (c)

Explanation: Magnification: \(m=\frac{-v}{u}\). Since \(m=-1\), we have \(-1=\frac{v}{u}\), which simplifies to \(\mathrm{v}=-u\). This means the image distance is equal to the object distance.

Lens formula: Substitute \(v=-u\) and \(f=20 \mathrm{~cm}\) into the lens formula:

\[\begin{aligned} & \frac{1}{f}=\frac{1}{v}-\frac{1}{u} \\ & \frac{1}{20}=-\frac{1}{u}-\frac{1}{u} \\ & \frac{1}{20}=-\frac{2}{u} \\ & u=-2 \times 20=-40 \mathrm{~cm} \end{aligned}\]

However, the magnitude of the object distance is 40 cm.

Alternate method :

Since the magnification is -1, it means that the magnitudes of the object distance \((u)\) and the image distance \((v)\) are equal but in opposite directions. This occurs when the object is placed at twice the focal length \((2 f)\) from the lens.

Given that \(f=20 \mathrm{~cm}\), we calculate:

\[\begin{aligned} u & =2 f=2 \times 20 \mathrm{~cm} \\ & =40 \mathrm{~cm} \end{aligned}\]
11

An optical device ‘X’ is placed obliquely in the path of a narrow parallel beam of light. If the emergent beam gets displaced laterally, the device ‘X’ is:

[1 mark]
Aplane mirror
Bconvex lens
Cglass slab
Dglass prism
Solution

Ans. (c)

Explanation: When a parallel beam of light enters a glass slab obliquely, it refracts, travels through the glass slab and then refracts again as it exits. The emergent beam is parallel to the incident beam but laterally displaced. The amount of displacement depends on the angle of incidence and the thickness of the glassslab.

12

A piece of wire of resistance ‘R’ is cut lengthwise into three identical parts. These parts are then connected in parallel. If the equivalent resistance of this combination is R’, then the value of R/R’ is:

[1 mark]
A1/9
B1/3
C3
D9
Solution

Ans. (d)

Explanation: When the wire is cut into 3 equal parts, the resistance of each part will be \(\frac{R}{3}\).

Now they are connected in parallel, so

\[\begin{aligned} & \frac{1}{\mathrm{R}^{\prime}}=\frac{1}{\frac{\mathrm{R}}{3}}+\frac{1}{\frac{\mathrm{R}}{3}}+\frac{1}{\frac{\mathrm{R}}{3}} \\ & \frac{1}{\mathrm{R}^{\prime}}=\frac{3}{\mathrm{R}}+\frac{3}{\mathrm{R}}+\frac{3}{\mathrm{R}}=\frac{9}{\mathrm{R}} \end{aligned}\]
\[\mathrm{R}^{\prime}=\frac{\mathrm{R}}{9}\]

Now \(\frac{\mathrm{R}}{\mathrm{R}^{\prime}}=9\)

13

An electric bulb is rated 220 V; 11W. The resistance of its filament when it glows with a power supply of 220 V is:

[1 mark]
A\(4400 \Omega\)
B\(440 \Omega\)
C\(400 \Omega\)
D\(20 \Omega\)
Solution

Ans. (a)

Explanation: Resistance \(=\frac{\mathrm{V}^{2}}{\mathrm{P}}=\frac{220 \times 220}{11}=4400 \Omega\)

14

The minimum number of identical bulbs of rating \(4 \mathrm{~V} ; 6 \mathrm{~W}\), that can work safely with desired brightness, when connected in series with a 240 V mains supply is:

[1 mark]
A20
B40
C60
D80
Solution

Ans. (c)

Explanation: Resistance of each bulb

\[\begin{aligned} & R=\frac{V^{2}}{P} \\ & \Rightarrow R=\frac{(4)^{2}}{6} \\ & \Rightarrow R=\frac{8}{3} \Omega \end{aligned}\]

Maximum current that can flow through the bulb without damaging it

\[\begin{array}{ll} & \mathrm{I}_{\max }=\frac{\mathrm{P}}{\mathrm{~V}} \\ \Rightarrow & \mathrm{I}_{\max }=\frac{6}{4} \\ \Rightarrow & \mathrm{I}_{\max }=1.5 \mathrm{~A} \end{array}\]

Thus, minimum resistance required in the circuit

\[\begin{array}{ll} & \mathrm{R}_{\min }=\frac{\mathrm{V}_{\mathrm{S}}}{\mathrm{I}_{\max }} \\ \Rightarrow & \mathrm{R}_{\min }=\frac{240}{1.5} \\ \Rightarrow & \mathrm{R}_{\min }=160 \Omega \end{array}\]

Let \(n\) number of bulbs are connected in series in the circuit. Equivalent resistance of \(n\) bulbs

\[\operatorname{Req}\left(\mathrm{R}_{\min }\right)=n \mathrm{R}=\frac{8 n}{3}\]

But,

\[\frac{8 n}{3} \leq 160\]

⇒

\[n \leq 60\]

Thus, the minimum number of bulbs required is 60.

15

In the food chains given below. Select the most efficient food chain in terms of energy:

[1 mark]
AGrass → Grasshopper → Frog → Snake
BPlants → Deer → Lion
CPlants → Man
DPhytoplankton → Zooplankton → Small Fish → Big Fish
Solution

Ans. (c)

Explanation: A shorter food chain is more efficient than a longer food chain because less energy is lost at each trophic level, resulting in more energy reaching the top consumers. The food chain in option (c) has only two trophic levels and energy loss is minimal, making it an efficient way to transfer energy.

16

Which one of the following gets biomagnified at different levels in a food chain?

[1 mark]
ACarbon monoxide
BCFC’s
CDDT
DManure
Solution

Ans. (c)

Explanation: Biomagnification is the process by which the concentration of harmful substances like DDT (Dichlorodiphenyltrichloroethane) increases at higher trophic levels in a food chain. The increased concentration of DDT at each tropic level, poses severe threats to top predators and humans due to its long-term persistence in the ecosystem.

17

Assertion (A): In large animals, oxygen can reach different parts of the animal’s body easily.

Reason (R): Respiratory pigments take up oxygen from the air and carry it to body tissues.

[1 mark]
ABoth Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
BBoth Assertion (A) and Reason (R) are true, and Reason (R) is not the correct explanation of Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (a)

Explanation: In large animals, oxygen is efficiently transported by haemoglobin, a respiratory pigment in red blood cells. Haemoglobin binds oxygen in the lungs and carries it through the circulatory system. The heart pumps oxygen-rich blood to body tissues, where haemoglobin release oxygen for cellular respiration.

18

Assertion (A): Concentrated nitric acid is diluted by adding water slowly to acid with constant stirring.

Reason (R): Concentrated nitric acid is easily soluble in water.

[1 mark]
ABoth Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
BBoth Assertion (A) and Reason (R) are true, and Reason (R) is not the correct explanation of Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (d)

Explanation: The acid must always be added slowly to water with constant stirring as the process is highly exothermic.

19

Assertion (A): In reptiles, the temperature at which the fertilised eggs are kept decides the sex of the offsprings.

Reason (R): Sex is not genetically determined in some animals.

[1 mark]
ABoth Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
BBoth Assertion (A) and Reason (R) are true, and Reason (R) is not the correct explanation of Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (a)

Explanation: In some animals, sex is influenced by environmental factors rather than genetics. In some reptiles, like turtles and crocodiles, sex is not genetically determined but the temperature at which eggs are incubated influences the sex of the hatchlings, a phenomenon known as Temperature-Dependent Sex Determination (TSD).

20

Assertion (A): When ciliary muscles contract, eye lens becomes thin.

Reason (R): Ciliary muscles control the power of the eye lens.

[1 mark]
ABoth Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
BBoth Assertion (A) and Reason (R) are true, and Reason (R) is not the correct explanation of Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (d)

Explanation: When ciliary muscles contract, the eye lens becomes thicker (more convex), not thinner. Ciliary muscles control the power of the eye lens. By contracting and relaxing, they change the shape of the lens and therefore its focal length and refractive power. This process is called accommodation.

✍️
CBSE Science 2025 · 31/4/1

Section B — Very Short Answer

Questions 21–26 · 2 marks each
6
Very Short
✍️
Section B — Very Short Answer
Questions 21–26 · 2 marks each
21

Define oxidation. Identify and name the substance oxidised in the following reaction:

\[\mathrm{CuO}+\mathrm{H}_{2} \rightarrow \mathrm{Cu}+\mathrm{H}_{2} \mathrm{O}\]
[2 marks]
Solution

Oxidation is the chemical process, where a substance loses electrons or hydrogen or gains oxygen atoms.

In this reaction, the substance that is oxidised is hydrogen \(\left(\mathrm{H}_{2}\right)\)

22

(A) Show the formation of magnesium chloride by electron transfer. Write the name of the cation and anion present in the compound formed. (Atomic Number of \(\mathrm{Mg}=12, \mathrm{Cl}=17\) )

OR

(B) How is zinc extracted from its ore? Name the processes involved in the extraction and write chemical equations for the reactions that occur during these processes.

[2 marks]
Solution

(A) Atomic number of Magnesium (Mg) atom is 12.

Electronic configuration \(=2,8,2\). So, it contains 2 valence electrons and loses 2 electrons to attain noble gas configuration and forms Magnesium ion \(\left(\mathrm{Mg}^{2+}\right)\) Atomic number of Chlorine (Cl) atom is 17.

Electronic configuration \(=2,8,7\). So, it gains 1 electron to attain noble gas configuration and forms Chloride ion \(\mathrm{Cl}^{-}\).

CBSE Class 10 Science 2025 31/4/1 Question 22 solution diagram

(B) The metals in the middle of the reactivity series like Zinc are moderately reactive and they are found as oxides- ZnO, sulphides – ZnS or carbonates- \(\mathrm{ZnCO}_{3}\) in the Earth’s crust.

Chemical reactions involved in the roasting and calcination of Zinc ores are as follows:

Concentration: The ore is crushed and then concentrated by the froth flotation process.

Roasting: Sulphide ores are heated below their melting point in the presence of air to form Zinc oxide.

\[2 \mathrm{ZnS}+3 \mathrm{O}_{2} \rightarrow 2 \mathrm{ZnO}+2 \mathrm{SO}_{2}\]

Calcination: Carbonate ores are heated below their melting point in the absence of air to form Zinc oxide

\[\mathrm{ZnCO}_{3} \rightarrow \mathrm{ZnO}+\mathrm{CO}_{2}\]

Reduction of oxide ore: It can be done by heating oxide ore with a suitable reducing agent like carbon.

\[\mathrm{ZnO}+\mathrm{C} \rightarrow \mathrm{Zn}+\mathrm{CO}\]

Purification: Zinc is purified by electrolytic refining.

23

“Plants use a variety of techniques to get rid of waste material.” Justify this statement giving any four ways.

[2 marks]
Solution

Plants use various techniques to get rid of waste, ensuring their proper growth and functioning. Some of the key waste removal methods include:

(i) Leaf Fall (Abscission): Plants store waste materials like excess salts and metabolic wastes in old leaves, which eventually shed during leaf fall.

(ii) Transpiration: Excess water and some dissolved wastes are removed through stomata in leaves.

(iii) Storing Waste in Vacuoles: Plants store toxic wastes like alkaloids, tannins and latex in vacuoles of leaves, bark, or fruits.

(iv) Excretion through Roots: Some plants release waste into the soil through roots, such as organic acids or resins.

24

Explain with the help of a flow chart that in human beings father is responsible for the sex (male or female) of the child.

[2 marks]
Solution

Following is the flowchart to show that in humans, the father is responsible for determining the sex of the child:

Mother (XX) → X-bearing egg

Father (XY) → X-bearing sperm or Y-bearing sperm

XX → Female child    |    XY → Male child

Since the mother always contributes an X chromosome, the father’s sperm (X or Y) decides the child’s sex.

25

(A) Draw a ray diagram to show the refraction of a ray of light passing through an equilateral glass prism. Mark the angle through which the emergent ray bends from the direction of the incident ray and also name it.

OR

(B) Name the type of lenses required by the persons for the correction of their defect of vision called presbyopia. Write the structure of the lenses commonly used for the correction of this defect giving reason for such designs.

[2 marks]
Solution

(A)

CBSE Class 10 Science 2025 31/4/1 Question 25 solution diagram

The angle through which the emergent ray bends from the direction of the incident ray is called \(\angle \Delta=\) Angle of deviation.

OR

(B) The lens is bi-focal which is used for the correction of presbyopia.

A common type of bi-focal lens consists of both concave and convex lenses. The upper portion consists of a concave lens. It facilitates distant vision. The lower part is a convex lens and it facilitates near vision.

26

What are magnetic field lines. List two important properties of magnetic field lines.

[2 marks]
Solution

Magnetic field lines are imaginary lines tangents to those that show the direction and density of the lines indicates the strength of a magnetic field. They are used to represent the magnetic field around a magnet.

Two properties of magnetic field lines

(i) Outside the magnet, the field lines emerge from the north pole and enter at the south pole. Inside the magnet, the direction of field lines is from its south pole to its north pole. Thus, the magnetic field lines are closed curves.

(ii) No two field lines are found to cross each other. If they did, it would mean that at the point of intersection, the compass needle would point towards two directions, which is not possible.

🔬
CBSE Science 2025 · 31/4/1

Section C — Short Answer

Questions 27–33 · 3 marks each
7
Short Answer
🔬
Section C — Short Answer
Questions 27–33 · 3 marks each
27

(A) Why do we balance a chemical equation? Name and state the law that suggests the balancing of a chemical equation? Balance the following chemical equation:

\[\mathrm{Zn}+\mathrm{H}_{3} \mathrm{PO}_{4} \rightarrow \mathrm{Zn}_{3}\left(\mathrm{PO}_{4}\right)_{2}+\mathrm{H}_{2}\]

OR

(B) Define a precipitation reaction. Give its example and also express the reaction that occurs in the form of a balanced chemical equation.

[3 marks]
Solution

(A) A balanced chemical equation has the same number of atoms on both sides of the equation.

Chemical equations are balanced to follow the law of conservation of mass, which states that matter can neither be created nor destroyed.

\[3 \mathrm{Zn}(\mathrm{~s})+2 \mathrm{H}_{3} \mathrm{PO}_{4}(\mathrm{aq}) \rightarrow \mathrm{Zn}_{3}\left(\mathrm{PO}_{4}\right)_{2}(\mathrm{aq})+3 \mathrm{H}_{2}(\mathrm{aq})\]

OR

(B) A chemical reaction in which an insoluble substance is formed is called a precipitation reaction.

Example: \(\mathrm{Na}_{2} \mathrm{SO}_{4}(\mathrm{aq})+\mathrm{BaCl}_{2}(\mathrm{aq}) \rightarrow \mathrm{BaSO}_{4}+2 \mathrm{NaCl}\) (aq) (ppt.)

Sodium sulphate reacts with Barium chloride to form precipitates of Barium sulphate.

28

Design an activity to show that metals are good conductors of heat and have high melting points.

[3 marks]
Solution

The iron metal rod is heated at one end with the help of a burner. After some time, the other end of the rod gets very hot. This activity proves that metals

are good conductors of heat and to melt the metal, it needs a high temperature.

CBSE Class 10 Science 2025 31/4/1 Question 28 solution diagram
29

The digestion of food in human alimentary canal is a complex process. State the enzyme/salt present in the following and mention their function in the process of digestion:

(i) Saliva

(ii) Bile Juice

(iii) Pancreatic Juice

[3 marks]
Solution

(i) Saliva: Saliva contains the enzyme salivary amylase, which breaks down starch into maltose and smaller carbohydrates.

(ii) Bile juice: It contains bile salts, but no digestive enzymes. Bile plays a key role in fat digestion by breaking large fat droplets into smaller ones, a process called emulsification. This increases the surface area for lipase to act efficiently.

(iii) Pancreatic juice: It contains digestive enzymes and bicarbonate ions. Amylase breaks down starch into maltose, while lipase helps digest fats into fatty acids and glycerol. The bicarbonate ions neutralise acidic chyme from the stomach and create an alkaline environment for enzyme activity.

30

State two limitations of electrical impulses in multicellular organisms. Why is chemical communication better than electrical impulses as a means of communication between cells in multicellular organisms?

[3 marks]
Solution

Limitations of Electrical Impulses in Multicellular Organisms

(i) Restricted Communication: Electrical impulses can only reach cells connected by nervous tissue and do not communicate with every cell in the body.

(ii) Recovery Time: After transmitting an impulse, a nerve cell requires time to reset before generating and transmitting a new impulse, preventing continuous signalling.

Chemical communication (e.g., hormones) is better than electrical impulses in multicellular organisms because they can potentially reach all cells in the body, irrespective of nervous connections, and can occur continuously and consistently.

31

If we want to obtain a virtual and magnified image of an object by using a concave mirror of focal length 18 cm, where should the object be placed? Use mirror formula to determine the object distance for an image of magnification +2 produced by this mirror to justify your answer.

[3 marks]
Solution

The object should be placed between the pole and focus i.e., at a distance less than 18 cm to get a virtual and magnified image using a concave mirror of focal length 18 cm.

For a concave mirror, focal length, \(f=-18 \mathrm{~cm}\), magnification, \(m=+2\)

\[m=-\frac{v}{u}=2\]

⇒

\[v=-2 u\]

Applying mirror formula,

\[\begin{gathered} \frac{1}{v}+\frac{1}{u}=\frac{1}{f} \\ \frac{1}{-2 u}+\frac{1}{u}=\frac{1}{-18} \end{gathered}\]
\[\begin{aligned} \frac{-1+2}{2 u} & =\frac{1}{-18} \\ \frac{1}{2 u} & =\frac{1}{-18} \\ u & =-9 \mathrm{~cm} \end{aligned}\]

Hence, the position of the object is in front of the mirror at a distance of 9 cm from the pole.

32

The electrical resistivity of three materials A, B and C at 20°C is given below:

MaterialResistivity \(\boldsymbol{(} \boldsymbol{\Omega} \mathrm{~ m} \boldsymbol{)}\)
A\(10^{17}\)
B\(44 \times 10^{-6}\)
C\(1.62 \times 10^{-8}\)

(i) Classify these materials as conductor, alloy and insulator.

(ii) Give one example of each of these materials and state one use of each material in the design of an electrical appliance say an electric stove or an electric iron.

[3 marks]
Solution

(i) Classification:

Material A: Resistivity is \(10^{17} \Omega \mathrm{~m}\). This is extremely high, indicating an insulator.

Material B: Resistivity is \(44 \times 10^{-6} \Omega \mathrm{~m}\). This value is in the range of resistivities for alloys. Alloys have higher resistivity than pure metals but lower than insulators.

Material C: Resistivity is \(1.62 \times 10^{-8} \Omega \mathrm{~m}\). This is very low characteristic of a conductor.

(ii) Examples and Uses:

Material A (Insulator):

Example: Mica

Use in an electric stove/iron: Mica (or other insulating materials like ceramic, bakelite, etc.) is used for electrical insulation. It prevents the current from flowing to unintended parts of the appliance and protects users from electric shock. For example, it might be used to insulate the heating element from the metal casing of the appliance.

Material B (Alloy):

Example: Nichrome (an alloy of nickel and chromium)

Use in an electric stove/iron: Nichrome is used for the heating element. Its relatively high resistivity compared to pure metals allows it to get hotter when current passes through it. It also has a high melting point and does not oxidise easily at high temperatures, making it suitable for this application.

Material C (Conductor):

Example: Copper

Use in an electric stove/iron: Copper is used for the connecting wires because of its excellent conductivity. It allows the electric current to easily reach the heating element.

33

What are decomposers? Give two examples. State how they maintain a balance in an ecosystem.

[3 marks]
Solution

Decomposers are organisms that break down dead plants, animals and organic matter, converting them into simpler substances.

Examples: Bacteria (e.g., Pseudomonas, Bacillus), fungi (e.g., Mushrooms, Molds, Yeasts)

Functions help in maintaining ecological balance:

(i) Recycle nutrients: Break down organic matter into nutrients like carbon, nitrogen and phosphorus and return them to the soil, making them available for plants.

(ii) Waste removal: They prevent the accumulation of dead matter by cleaning up the environment.

📘
CBSE Science 2025 · 31/4/1

Section D — Long Answer

Questions 34–36 · 5 marks each
3
Long Answer
📘
Section D — Long Answer
Questions 34–36 · 5 marks each
34

(A) A carbon compound ‘A’ on heating with excess conc. \(\mathrm{H}_{2} \mathrm{SO}_{4}\) forms a compound ‘B’, which on addition of one mole of hydrogen gas in the presence of nickel catalyst forms a compound ‘C’. ‘C’ on combustion in air forms 2 moles of carbon dioxide and 3 moles of water. Identify ‘A’, ‘B’ and ‘C’ and write their structures. Give chemical equations of the reactions involved. Also state the role of concentrated sulphuric acid in the formation of ‘B’ from ‘A’.

OR

(B) A carbon compound ‘A’ is widely used as a preservative in pickles and has a molecular formula \(\mathrm{C}_{2} \mathrm{H}_{4} \mathrm{O}_{2}\). This compound reacts with ethanol to form a sweet smelling compound ‘B’.

(i) Identify the compound ‘A’ and write its structure.

(ii) Write the chemical equation for the reaction of ‘A’ with ethanol to form compound ‘B’. State the role of presence of an acid in the reaction.

(iii) How can we get compound ‘A’ back from ‘B’?

(iv) How can ‘A’ be obtained from ethanol?

(v) Name the gas produced when compound ‘A’ reacts with washing soda.

[5 marks]
Solution

(A) Compounds A, B and C are

A: Ethyl alcohol or Ethanol \(-\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{OH}\)

B: Ethene: \(\mathrm{CH}_{2}=\mathrm{CH}_{2}\) (Unsaturated compound)

C: Ethane: \(\mathrm{CH}_{3}-\mathrm{CH}_{3}\) (Saturated compound)

C on combustion gives:

\[\mathrm{CH}_{3}-\mathrm{CH}_{3}+7 / 2 \mathrm{O}_{2} \rightarrow 2 \mathrm{CO}_{2}+3 \mathrm{H}_{2} \mathrm{O}\]

The chemical equation involves:

\[\begin{aligned} & \mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{OH} \xrightarrow{\text { conc. } \mathrm{H}_{2} \mathrm{SO}_{4}} \mathrm{CH}_{2}=\mathrm{CH}_{2}+\mathrm{H}_{2} \mathrm{O} \\ & \mathrm{CH}_{2}=\mathrm{CH}_{2}+\mathrm{H}_{2} \xrightarrow{\mathrm{Ni}} \mathrm{CH}_{3}-\mathrm{CH}_{3} \end{aligned}\]

Role of \(\mathrm{H}_{2} \mathrm{SO}_{4}\) – it acts as a dehydrating agent and removes water molecule to form ethene.

OR

(B) (i) A is acetic acid or ethanoic acid: \(\mathrm{CH}_{3}-\mathrm{COOH}\)

(ii)

\[\begin{aligned} & \mathrm{CH}_{3}-\mathrm{COOH}+\mathrm{C}_{2} \mathrm{H}_{5} \mathrm{OH} \xrightarrow{\mathrm{H}_{2} \mathrm{SO}_{4}} \mathrm{CH}_{3} \mathrm{COOC}_{2} \mathrm{H}_{5} \\ & +\mathrm{H}_{2} \mathrm{O} \end{aligned}\]

This is esterification and \(\mathrm{H}_{2} \mathrm{SO}_{4}\) is used as a catalyst.

(iii) The process of obtaining compound A back from B is called hydrolysis of ester.

(iv) A can be obtained by oxidation of ethanol in the presence of oxidising agent \(\mathrm{KMnO}_{4}\) followed by acidification.

\[\mathrm{C}_{2} \mathrm{H}_{5} \mathrm{OH}+2[\mathrm{O}] \xrightarrow{\mathrm{KMnO}_{4}} \mathrm{CH}_{3} \mathrm{COOH}+\mathrm{H}_{2} \mathrm{O}\]

(v) Carbon dioxide gas is produced.

\[\begin{aligned} 2 \mathrm{CH}_{3} \mathrm{COOH}(a q)+\mathrm{Na}_{2}\mathrm{CO}_{3}(s) \rightarrow & 2 \mathrm{CH}_{3}\mathrm{COONa}(a q) \\ & +\mathrm{CO}_{2}(g)+\mathrm{H}_{2} \mathrm{O} \end{aligned}\]
35

(A) (i) What is regeneration? Give one example of an organism that shows this process and one organism that does not. Why does regeneration not occur in the latter?

(ii) Water in a pond appears dark green and contains filamentous structures. Name these structures and the method by which they reproduce. Explain the process.

OR

(B) (i) Name the part performing following functions in human male reproductive system:

(a) Carries sperm

(b) Production of male gametes

(c) Whose secretion makes the transport of sperms easier

(d) Provide suitable temperature for sperm formation

(ii) Write any two characteristics of sperms.

(iii) What are surgical contraceptive methods? Give the side effect caused by this procedure.

[5 marks]
Solution

(A) (i) (a) Many fully differentiated organisms possess the ability to generate new individuals from their body parts through regeneration. If an organism is cut or broken into multiple pieces, some of these fragments can develop into separate individuals.

Examples: (a) Hydra can regenerate its entire body from a small portion.

(b) Humans and other mammals (e.g., lions, elephants, dogs) do not show regeneration.

Reason: They have differentiated cells that lack the ability to divide and form new body parts.

(ii) The filamentous structures seen in the dark green water of a pond are algae, such as Spirogyra.

Methods of reproduction:

Fragmentation (Asexual Reproduction): The filament breaks into smaller fragments due to natural processes or external forces. Each fragment regenerates the missing parts through cell division and growth and develops into a complete organism.

(B) (i) (a) Vas deferens

(b) Testes

(c) Prostate and Seminal vesicles

(d) Scrotum

(ii) Characteristics of sperm:

• Sperm cells are tiny and cannot be seen without a microscope.

• Sperm consists of a head (carries genetic material), a middle piece and a tail (for movement toward the female egg).

(iii) The surgical contraceptive methods are:

• Blockage of vas deferens in males

• Blockage of the fallopian tube in females

Side effect of this method: While these methods are effective and safe in the long run, improper surgery may lead to infections or complications.

36

(A) (i) Draw the pattern of the magnetic field lines for the two parallel straight conductors carrying current of same magnitude ‘I’ in opposite directions as shown. Show the direction of magnetic field at a point O which is equidistant from the two conductors. (Consider that the conductors are inserted normal to the plane of a rectangular cardboard.)

CBSE Class 10 Science 2025 31/4/1 Question 36 diagram

(ii) In our houses we receive A.C. electric power of 220 V. In electric iron or electric heater cables having three wires with insulation of three different colours – red, black and green are used to draw current from the mains.

(a) What are these three different wires called? Name them colourwise.

(b) What is the potential difference between the red wire and the black wire?

(c) What is the role of the wire with green insulation in case of accidental leakage of electric current to the metallic body of an electrical appliance?

OR

(B) (i) By using the given experimental set-up. How can it be shown that:

CBSE Class 10 Science 2025 31/4/1 Question 36 diagram

(a) a force is exerted on the current-carrying conductor AB when it is placed in a magnetic field.

(b) the direction of force can be reversed in two ways.

(ii) When will the magnitude of the force be highest?

(iii) State Fleming’s left hand rule.

[5 marks]
Solution

(A) (i)

CBSE Class 10 Science 2025 31/4/1 Question 36 solution diagram

The direction of the magnetic field at O which is equidistant from the two conductors is North to South on the plane of the card board as shown in the figure.

(ii) (a) The three wires are:

• Red: Live wire (or Phase wire)

• Black: Neutral wire

• Green: Earth wire (or Ground wire)

(b) The potential difference between the red (live) wire and the black (neutral) wire is 220 V.

(c) The green earth wire provides a low-resistance path for current to flow to the ground in case of an electrical fault, such as a short circuit or leakage. If the live wire accidentally comes in contact with the metallic body of the appliance, the current flows through the earth wire to the ground instead of passing through a person who might touch the appliance. This prevents electric shock.

OR

(B) (i) (a) From the deflection of the conductor AB, when current flows through the conductor, it can be shown that a force is exerted on it.

(b) The direction of force can be reversed if:

• the direction of current-flowing through the conductor is reversed.

• the poles of the horseshoe magnet is interchanged.

(ii) The magnitude of the force is the highest when the direction of the current is at right angles to the direction of the magnetic field.

(iii) Fleming’s Left-hand rule: Stretch the thumb, forefinger and middle finger of your left hand such that they are mutually perpendicular. If the first finger points in the direction of the magnetic field and the second finger in the direction of current,

then the thumb will point in the direction of motion or the force acting on the conductor.

🧠
CBSE Science 2025 · 31/4/1

Section E — Case / Source Based

Questions 37–39 · 4 marks each
3
Case Based
🧠
Section E — Case / Source Based
Questions 37–39 · 4 marks each
37

Common salt is a very important chemical compound for our daily life. It’s chemical name is sodium chloride and it is used as a raw material in the manufacture of caustic soda, washing soda, baking soda, etc. It is also used in the preservation of pickles, butter, meat, etc.

(i) Name the acid and the base from which common salt can be obtained. [1]

(ii) State the nature (acidic/basic/neutral) of sodium chloride. Give reason for the justification for your answer. [1]

(iii) (A) What happens when electric current is passed through an aqueous solution of sodium chloride (called brine)? Name the products obtained along with the corresponding places in the electrolytic cell where each of these products is obtained. [2]

OR

(iii) (B) How is washing soda obtained from sodium chloride? Give chemical equation of the reactions involved in the process. [2]

[4 marks]
Solution

(i) Hydrochloric acid (HCl) and sodium hydroxide (NaOH) are used to obtain common salt (NaCl).

(ii) Sodium chloride (NaCl) is a neutral salt with a pH around 7 as it is made of strong acid (HCl) and strong base (NaOH).

(iii) (A) Brine solution (NaCl) undergoes electrolysis, causing the solution to decompose into chlorine gas at the anode and Hydrogen gas at the cathode, and sodium hydroxide remains in the solution.

\[\begin{aligned} & 2 \mathrm{NaCl}(\mathrm{aq})+2 \mathrm{H}_{2} \mathrm{O}(\mathrm{aq}) \rightarrow 2 \mathrm{NaOH}(\mathrm{aq})+\mathrm{Cl}_{2}(\mathrm{~g})+ \\ & \mathrm{H}_{2}(\mathrm{~g}) \end{aligned}\]

OR

(iii) (B) Cold and concentrated solution of sodium chloride saturated with ammonia is allowed to react with \(\mathrm{CO}_{2}\) to form sodium bicarbonate, which on heating gives sodium carbonate with the evolution of \(\mathrm{CO}_{2}\). When sodium carbonate reacts with water to form sodium carbonate decahydrate.

\[\begin{aligned} & \mathrm{NaCl}+\mathrm{H}_{2} \mathrm{O}+\mathrm{CO}_{2}+\mathrm{NH}_{3} \rightarrow \mathrm{NaHCO}_{3}+\mathrm{NH}_{4} \mathrm{Cl} \\ & 2 \mathrm{NaHCO}_{3} \xrightarrow{\Delta} \mathrm{Na}_{2} \mathrm{CO}_{3}+\mathrm{CO}_{2}+\mathrm{H}_{2} \mathrm{O} \\ & \mathrm{Na}_{2} \mathrm{CO}_{3}+10 \mathrm{H}_{2} \mathrm{O} \rightarrow \mathrm{Na}_{2} \mathrm{CO}_{3} \cdot 10 \mathrm{H}_{2} \mathrm{O} \end{aligned}\]
38

In life there are certain changes in the environment called ‘stimuli’ to which we respond appropriately. Touching a flame suddenly is a dangerous situation for us. One way is to think consciously about the possibility of burning and then moving the hand. But our body has been designed in such a way that we save ourself from such situations immediately.

(i) Name the action by which we protect ourself in the situation mentioned above and define it. [1]

(ii) Write the role of (a) motor and (b) relay neuron. [1]

(iii) (A) What are the two types of nervous system in human body? Name the components of each of them. [2]

OR

(iii) (B) Which part of the human brain is responsible for: [2]

(a) thinking

(b) picking up a pencil

(c) controlling blood pressure

(d) controlling hunger

[4 marks]
Solution

(i) Action: Reflex action

Definition: Reflex action is an automatic and immediate response to a stimulus without conscious thought, controlled by the spinal cord.

(ii) Role of Motor and Relay Neuron:

(a) Motor Neuron: Carries signals from the Central Nervous System (CNS) to the muscles, causing movement or response.

(b) Relay Neuron: Acts as a connector between sensory and motor neurons, transmitting signals within the spinal cord or brain.

(iii) (A) Two Types of Nervous Systems:

(i) Central Nervous System (CNS): Includes the brain and spinal cord.

(ii) Peripheral Nervous System (PNS): Includes nerves that connect the CNS to the rest of the body, further divided into the somatic and autonomic nervous systems.

OR

(iii) (B)

(a) Thinking → Cerebrum

(b) Picking up a pencil → Cerebellum

(c) Controlling blood pressure → Medulla Oblongata

(d) Controlling hunger → Hypothalamus

39

The students in a class took a thick sheet of cardboard and made a small hole in its centre. Sunlight was allowed to fall on this small hole and they obtained a narrow beam of white light. A glass prism was taken and this white light was allowed to fall on one of its faces. The prism was turned slowly until the light that comes out of the opposite face of the prism appeared on the nearby screen. They studied this beautiful band of light and concluded that it is a spectrum of white light.

(i) Give any one more instance in which this type of spectrum is observed. [1]

(ii) What happens to white light in the above case? [1]

(iii) (A) List two conditions necessary to observe a rainbow. [2]

OR

(iii) (B) Draw a ray diagram to show the formation of a rainbow. Mark on it, points (a), (b) and (c) as given below: [2]

(a) Where dispersion of light occurs.

(b) Where light gets reflected internally.

(c) Where final refraction occurs.

[4 marks]
Solution

(i) Another instance where a spectrum of white light is observed is in the formation of a rainbow. It is a natural example of a spectrum of white light which is formed when sunlight is refracted and dispersed by raindrops.

(ii) When white light falls on the tiny water droplets, they refract and disperse the incident sunlight, then reflect it internally, and finally refract it again when it comes out of the raindrop forming a rainbow.

(iii) (A) Condition 1: Rain

• Rain droplets act like prisms that disperse light into a spectrum of colours. Rainbows are more likely to occur after a rainstorm or in the midst of a waterfall.

Condition 2: Sun’s position

• The sun must be behind the observer. The lower the sun is in the sky, the larger the arc of the rainbow will be.

OR

(iii) (B)

CBSE Class 10 Science 2025 31/4/1 Question 39 solution diagram

Scroll to Top