Table of Contents
Last Updated on November 17, 2026 by XAM CONTENT
Practice the IOQP 2021–22 Part I Physics Question Paper (NSEP 2021–22) with answers and detailed worked solutions. The examination was held on 13 March 2022 and contains 32 questions: 24 single-correct questions followed by 8 multiple-correct questions.
IOQP 2021–22 Physics Questions 1–24
A hollow non-conducing cone of base radius \(\mathrm{R}=50 \mathrm{~cm}\) and semi vertical angle of 15° has been uniformly charged on its curved surface up to three-fourth of its slant length from base with a surface charge density \(\sigma=2.5 \mu \mathrm{C} / \mathrm{m}^{2}\). The electric field produced at the location of the vertex of the cone is
Ans. (b)

A freely falling spherical rain drop gathers moisture (maintaining its spherical shape all the way) from the atmosphere at a rate \(\frac{\mathrm{dm}}{\mathrm{dt}}=\mathrm{kt}^{2}\) where t is the time and m is the instantaneous mass of the drop, the constant \(\mathrm{k}=12 \mathrm{gm} / \mathrm{s}^{3}\). If the drop, of initial mass \(\mathrm{m}_{0}=2 \mathrm{gm}\), starts falling from rest the instantaneous velocity of the drop exactly after 5 second shall be (ignore air friction and air buoyancy)
Ans. (a)
\(\mathrm{mg}-\mathrm{F}_{\text {th }}=\mathrm{ma}\)
multiplying with I.F.
Alternate Solution

Two planets, each of mass M and radius R are positioned (at rest) in space, with their centres a distance 4R apart. You wish to fire a projectile from the surface of one planet to the other. The minimum initial speed for which this may be possible is
Ans. (b)

A thin uniform metallic rod of length L and radius R rotates with an angular velocity \(\omega\) in a horizontal plane about a vertical axis passing through one of its ends. The density and the Young’s modulus of the material of the rod are \(\rho\) and Y respectively. The elongation in its length is

Ans. (b)

mass of shaded portion


this tension will be maximum at \(\mathrm{A}\left(\frac{\mathrm{m} \omega^{2} \ell}{2}\right)\) and minimum at ‘B’ (zero), elongation in element of width ‘dx’ = \(\frac{\text { Tdx }}{\text { AY }}\)
Total elongation \(\delta=\int \frac{\mathrm{Tdx}}{\mathrm{AY}}=\int_{0}^{\ell} \frac{\mathrm{m} \omega^{2}\left(\ell^{2}-x^{2}\right)}{2 \ell \mathrm{AY}} \mathrm{dx}\)
Consider a particle of mass m with a total energy E moving in a one dimensional potential field. The potential V(x) is plotted against x in the figure beside. The plot of momentum – position graph of this particle is qualitatively best represented by :





All plots are symmetrical about x-axis
Ans. (a)


Knowing that the parallel currents attract, the inward pressure on the curved surface of a thin walled, long hollow metallic cylinder of radius \(\mathrm{R}=50 \mathrm{~cm}\) carrying a current of \(\mathrm{i}=2\) amp parallel to its axis distributed uniformly over the entire circumference, is
Ans. (d)

This field is covered by the element \(\mathrm{Rd} \theta\) and remaining portion \(=\frac{\mu_{0} \mathrm{I}}{2 \pi \mathrm{R}} / 2=\frac{\mu_{0} \mathrm{I}}{4 \pi \mathrm{R}}\)
Force on \(\mathrm{rd} \theta\)
Pressure \(\mathrm{P}=\frac{\mathrm{dF}}{\mathrm{dA}}=\frac{\mathrm{dF}}{(\mathrm{Rd} \theta) \ell}=\frac{\mathrm{dF}}{\mathrm{dA}}=\frac{\mathrm{dF}}{(\mathrm{Rd} \theta) \ell}=\frac{\mu_{0} \mathrm{I}^{2}}{8 \pi^{2} \mathrm{R}^{2}}=2.55 \times 10^{-7} \mathrm{~N} / \mathrm{m}\)
Two masses move on a collision path as shown. Before the collision the object with mass 2M moves with a speed v making an angle \(\theta=\sin ^{-1} \frac{3}{5}\) to the x-axis while the object with mass M moves with a speed \(\frac{3}{2} \mathrm{v}\) making an angle \(\phi=\sin ^{-1} \frac{4}{5}\) with the x-axis. After the collision the object of mass 2M is observed to be moving to the right along the x -axis with a speed of \(\frac{4}{5} \mathrm{v}\). There are no external forces acting during the collision. The correct option is

Ans. (b)

\(\mathrm{P}_{\mathrm{i}}=\mathrm{P}_{\mathrm{f}}\) Along y-axis
\(\mathrm{M} \frac{3}{2} \mathrm{~V} \sin \phi-2 \mathrm{MN} \sin \theta=\mathrm{MN}_{\mathrm{y}_{2}}\)
\(\mathrm{P}_{\mathrm{i}}=\mathrm{P}_{\mathrm{f}}\) along x-axis
\(2 \mathrm{MV} \cos \theta+\mathrm{M} \frac{3}{2} \mathrm{~V} \cos \phi=2 \mathrm{M}\left(\frac{4 \mathrm{~V}}{5}\right)+\mathrm{MV}_{\mathrm{x}_{2}}\)
\(2 \mathrm{MN} \cdot \frac{4}{5}+\frac{3}{2} \mathrm{MN} \frac{3}{5}=\frac{8 \mathrm{MN}}{5}+\mathrm{MN}_{\mathrm{x}_{2}}\)
Velocity of COM, along x-axis
Ans. (b)
A large hemispherical water tank of radius R is filled with water initially upon a height \(h=\frac{R}{2}\). The water starts dripping out through a small orifice of cross-section area ‘a’ at its spherical bottom. The time taken to get the tank completely empty (neglect viscosity) is
Ans. (c)

If Pascal (Pa), the unit of pressure volt(V), the unit of potential and meter (L), the unit of length are taken as fundamental units, the dimensional formula for the permittivity \(\varepsilon_{0}\) of free space is expressed as
Ans. (b)
\(\varepsilon_{0} \propto(\mathrm{~Pa})^{\mathrm{a}}(\mathrm{V})^{\mathrm{b}}(\mathrm{L})^{\mathrm{c}}\)
by comparison
\(\varepsilon_{0} \propto(\mathrm{~Pa})^{1}(\mathrm{~V})^{-2}(\mathrm{~L})^{2}\)
Ans. (b)
A cycle wheel of mass M and radius R fitted with a siren at a point on its circumference, is mounted with its plane vertical on horizontal axle at about 3 feet above the ground. An observer stands in the vertical plane of the wheel at 100m away from the axle of the wheel on a horizontal platform. The siren emits a sound of frequency 1000 Hz and the wheel rotates clockwise with uniform angular speed \(\omega=\pi \mathrm{rad} / \mathrm{sec}\). Initially at \(\mathrm{t}=0 \mathrm{sec}\). the siren is nearest to the observer and moves downwards. The observer records the highest pitch of sound for the first time after (speed of sound in air is 330 \(\mathrm{ms}^{-1}\) )
Ans. (b)

time to receives sound signal \(=\frac{100}{330}=0.3 \mathrm{sec}\) total time \(=1.5+0.3=1.8 \mathrm{sec}\)
On a right angled transparent triangular prism ABC, when a ray of light is incident on face AB, parallel to the hypotenuse BC, it emerges out of the prism grazing along the surface AC. If instead the rays is made incident on face AC, parallel to the hypotenuse CB it gets totally reflected on face AB. The refractive index \(\mu\) of the material of the prism is :
Ans. (b)

from (i)
From (i) & (ii)
A circular disc of radius \(\mathrm{R}=10 \mathrm{~cm}\) is uniformly rolling on a horizontal surface with a velocity \(\mathrm{v}=4 \mathrm{~ms}^{-1}\) of centre of mass without slipping, the time taking by the disc to have the speed of point A (which lies on the circumference) equal to the present speed of point B (point B lies midway between centre and the point A) is

Ans. (b)

ans (b)
As shown in the figure, a particle of mass \(\mathrm{m}=10^{-10} \mathrm{~kg}\), moving with velocity \(\mathrm{v}_{0}=10^{5} \mathrm{~m} / \mathrm{s}\) approaches a stationary fixed target with impact parameter b from a large distance. If the fixed rigid target has a core with repulsive central force \(\mathrm{F}(\mathrm{r})=\frac{\mathrm{K}}{\mathrm{r}^{3}}\) where constant K > 0 and the particle scatters elastically. The closest distance of approach (if numerically \(\mathrm{K}=\mathrm{b}^{2}\) ) is

Ans. (b)

If the specific activity of C \({ }^{14}\) nuclide in a certain ancient wooden toy is known to be \(\frac{3}{5}\) of that in a recently fallen tree of the same class, the age of the ancient wooden toy is (The half-life of \(\mathrm{C}^{14}\) is 5570 years)
Ans. (b)
\(\mathrm{A}=\frac{3}{5} \mathrm{~A}_{0}\)
In questions 15 and 16 mark your answer as
((a)) If statement-I is true and statement-II is true and also if the statement-II is a correct explanation of statement-I
((b)) If statement-I is true and statement-II is true but the statement-II is a not a correct explanation of statement-I
((c)) If statement-I is true but the statement-II is false
((d)) If statement-I is false but statement-II is true
For Questions 15 and 16, use the Assertion–Reason option scheme shown with each question.
Statement-I: Work done in bringing a charge q from infinity to the center of a uniformly charged non- conducting solid sphere of radius R (with a total charge Q) is zero.
Statement-II: The potential difference between the centre and the surface of the uniformly charged non-conducting solid sphere of radius R (with a total charge Q) is \(\frac{1}{4 \pi \varepsilon_{0}} \times \frac{\mathrm{Q}}{2 \mathrm{R}}\).
Ans. (d)

Statement-I: The current flowing through a p-n junction is more in forward bias then that in the reverse bias.
Statement-II: The diffusion current, dominant in forward bias, is more than the drift current, dominant in the reverse bias.
Ans. (a)
Holes diffused from the p-side to n-side while electron diffuse from n-side to the p-side this is due to concentration gradient across p and n side p. Which giving ripe to a diffusion current across the function.
Consider the process of the melting of a spherical ball of ice originally at 0°C. Assuming that the heat is being absorbed uniformly through the surface and the rate of absorption is proportional to the instantaneous surface area. Which of the following is true for the radius (r) of the ice ball at any instant of time? Assume that the radius of the ice ball at \(\mathrm{t}=0\) is \(\mathrm{r}=\mathrm{R}_{0}\) and that the shape of the ball always remains spherical during melting. Also assume that L and \(\rho\) are respectively the latent heat and density of ice at 0°C.
Ans. (c)
\(\quad\left(\frac{\mathrm{dm}}{\mathrm{dt}}\right) \mathrm{L}=-\mathrm{KA}\)
The work done by the three moles of an ideal gas in the cyclic process ABCD shown in the diagram is approximately. Given that

Ans. (b)
\(\mu=3\),
cyclic process
Similarly W.D. AB and CD is zero.
The molar specific heat capacity of a certain gas is expressed as \(\mathrm{C}=\mathrm{C}_{\mathrm{V}}+\alpha \frac{\mathrm{P}}{\mathrm{T}}\). The equation of state for the process can be written as ( \(\alpha\) & A are constant)
Ans. (d)
\(\mathrm{C}=\mathrm{C}_{\mathrm{V}}+\alpha \frac{\mathrm{P}}{\mathrm{T}}\)
A metal bar of length \(\ell\) moves with a velocity \(v\) parallel to an infinitely long straight wire carrying a current I as shown in the figure. If the nearest end of the perpendicular bar always remains at a distance \(2 \ell\) from the current carrying wire, the potential difference (in volt) between two ends of the moving bar is :

Ans. (d)

consider a element of length dy at a distance y from the wire
Two point charges +Q each are located at \((0,0)\) and (L, 0) at a distance L apart on the X-axis. The electric field (E) in the region \(0



Ans. (d)

Let A, B and C are three points
At A
at B
But \(\left|E_{1}\right|=\left|E_{2}\right|=0\)
Between B and C
\(\mathrm{E}_{1}<\mathrm{E}_{2} \rightarrow\) resultant electric field is in \((-\hat{\mathrm{i}})\)

A long straight wire AB of length L(L >> a, L >> b) and resistance R is connected to a time varying source of emf V(t). The variation of applied emf V(t) with time is shown in Figure B. A circular metallic loop of radius \(r=b\) is placed coplanar with the current carrying wire with its centre at a distance a from the axis of the wire as shown. The induced current in the loop is


Ans. (a)

Slope of V-t
A simple circuit consists of a known resistance \(\mathrm{R}_{\mathrm{A}}=2 \mathrm{M} \Omega\) and an unknown resistance \(\mathrm{R}_{\mathrm{B}}\) both in series with a battery of 9 volt and negligible internal resistance. When the voltmeter is connected across the resistance \(\mathrm{R}_{\mathrm{A}}\), it measures 3 volt but when the same voltmeter is connected across \(\mathrm{R}_{\mathrm{B}}\) it reads 4.5 volt. The voltmeter measures 9V across the battery. Considering that the voltmeter has a finite resistance \(r\), the correct option is
Ans. (a)

\(2^{\text {nd }}\) situation
from (ii) in (i)
The optical powers of the objective and the eyepiece of a compound microscope are 100 D and 20 D respectively. The microscope magnification being equal to 50 when the final image is formed at \(\mathrm{d}=25 \mathrm{~cm}\) i.e., the least distance of vision. If the separation between the objective and the eyepiece is increased by 2 cm, the magnification of the microscope will be
Ans. (a)
\(\mathrm{f}_{0}=1 \mathrm{~cm}, \mathrm{fe}=5 \mathrm{~cm}\)
ANY NUMBER OF OPTIONS 4, 3, 2 or 1 MAY BE CORRECT MARKS WILL BE AWARDED ONLY IF ALL CORRECT OPTIONS ARE BUBBLED AND NO WRONG OPTION
IOQP 2021–22 Physics Questions 25–32
The electric field component of an electromagnetic wave is expressed as \(\mathrm{E}=(3 \mathrm{j}+\mathrm{bk}) \times 10^{-3} \sin 10^{7}(\mathrm{x}+2 \mathrm{y}+3 \mathrm{z}-\beta \mathrm{t})\) in SI units. Taking \(\mathrm{c}=3 \times 10^{8} \mathrm{~ms}^{-1}\) as the speed of electromagnetic wave in vacuum, choose the correct option(s)
Ans. (a, c, d)
\(\overrightarrow{\mathrm{E}}=(3 \hat{\mathrm{j}}+\mathrm{b} \hat{\mathrm{k}}) \times 10^{-3} \sin \left[10^{7}(\mathrm{x}+2 \mathrm{y}+3 \mathrm{z}-\beta \mathrm{t}]\right.\)
\(\overrightarrow{\mathrm{E}} . \overrightarrow{\mathrm{k}}=0\)
A parallel beam of light is made incident (as shown on the flat diametric plane of transparent semicircular thin sheet of thickness t (t << R) of refractive index \(\mu=\sqrt{2}\) at an angle of 45°. As a result of refraction, the light enters the semi-circular sheet and comes out at its curved surface.

Ans. (a, c, d)

\(1 \sin 45=\sqrt{2} \sin r\)
A certain of uniform area of cross section \(\mathrm{A}\left(\mathrm{a}=1.0 \mathrm{~cm}^{2}\right)\) with its length \(=2 \mathrm{~m}\) is thermally insulated on its lateral surface. The thermal conductivity (K) of the material of the rod varies with temperature T as \(\mathrm{K}=\frac{\mathrm{a}}{\mathrm{T}}\) where \(\alpha\) is a constant. The two ends of the rod are maintained at temperature of \(\mathrm{T}_{1}=\) 90°C and \(\mathrm{T}_{2}=10^{\circ} \mathrm{C}\). The correct option(s) is/are
Ans. (a, b, c, d)
\(\mathrm{k}=\frac{\alpha}{\mathrm{T}}\)

(a) \(\frac{\alpha \mathrm{A} \ln\left(\frac{90}{10}\right)}{4}=\frac{\alpha \mathrm{A} \ln \frac{\mathrm{T}}{10}}{0.5}\)
\(\frac{\mathrm{T}}{10}=1.733\)
\(\mathrm{T}_{2}=17.33\)
(b) \(\frac{\alpha \mathrm{A} \ln \frac{90}{10}}{4}=\frac{\alpha \mathrm{A} \ln \frac{90}{7}}{0.5}\)
\(\mathrm{T}=\frac{90}{1.73}=53^{\circ} \mathrm{C}\)
(c) \(\mathrm{q} / \mathrm{A}=\frac{\alpha \ln}{\ell} \frac{90}{10}=\frac{\alpha}{2} \times 2.2=1.1 \alpha\)
(d) \(\frac{\mathrm{dT}}{\mathrm{dx}}=-\frac{\mathrm{q}}{\mathrm{ka}}=\frac{\mathrm{q} \cdot \mathrm{T}}{\alpha \mathrm{A}}\)
Positronium is a short-lived \(\left(\approx 10^{-9} \mathrm{~s}\right)\) bound state of an electron and positron (a positively charged particle with mass and charge equal (in magnitude) to an electron) revolving round their common centre of mass. If \(\mathrm{E}_{0} \mathrm{v}_{0}\) and \(\mathrm{a}_{0}\) are respectively the ground state energy, the orbital speed of electron in first orbit and the radius of the first \((\mathrm{n}=1)\) Bohr orbit for Hydrogen atom, the corresponding quantities E, v and a for the positronium are
Ans. (a, c)
For positronium, the electron and positron have equal masses, so the reduced mass is
For a hydrogen-like two-body system, the ground-state energy is proportional to the reduced mass and the Bohr radius is inversely proportional to the reduced mass.
Therefore, the correct options are (a) and (c).
A thin double convex lens of radii of curvature \(\mathrm{R}_{1}=20 \mathrm{~cm}\) and \(\mathrm{R}_{2}=60 \mathrm{~cm}\) is made-up of a transparent material refractive index \(\mu=1.5\). Choose the correct option(s).
Ans. (a, b, d)
(a)

When is
((b))

\(\mathrm{F}_{\mathrm{eq}}=-30 \mathrm{~cm}\)
(c)

A thick hollow cylinder of height h and inner and outer radii a and b (b > a) made up of a poorly conducting material of resistivity \(\rho\) lies conducting material of resistivity \(\rho\) lies coaxially inside a long solenoid at its middle. The radius of the solenoid is larger than b. Throughout the interior of the solenoid, a uniform time varying magnetic field \(\mathrm{B}=\beta \mathrm{t}\) is produced parallel to solenoid axis. Here \(\beta\) is a constant. In this time varying magnetic field.
Ans. (a, b, c)

(a) \(\phi 2 \pi \mathrm{r}^{2} \mathrm{~B}\)
(b) \(\pi \mathrm{r}^{2} \beta=\mathrm{e}=\mathrm{di} \times \rho . \frac{2 \pi \mathrm{r}}{\mathrm{drh}}\)
(c) \(\mathrm{d}\left(\frac{1}{\mathrm{R}}\right)=\frac{\mathrm{drh}}{\rho 2 \pi \mathrm{r}}\)
A simple pendulum consisting of a small bob of mass m attached to a massless inextensible string of length \(\ell=2 \mathrm{~m}\), hanging vertically from the ceiling, is oscillating in a vertical plane with an angular amplitude \(\theta_{\mathrm{m}}\) such that the maximum tension in its string is three times the minimum tension in the string i.e., \(\mathrm{T}_{\text {max }}=3 \mathrm{~T}_{\text {min }}\). The correct option(s) is/are
Ans. (a, b, c, d)

\(\mathrm{T}_{\text {min }}=\mathrm{mg} \cos \theta\)
\(\mathrm{v}=\sqrt{2 \mathrm{~g} \ell\left(1-\cos \theta_{\mathrm{m}}\right)}\)
option (A) \(\mathrm{T}_{\text {max }}=\mathrm{mg}+\frac{\mathrm{mv}^{2}}{\ell}=\mathrm{mg}+\frac{\mathrm{m}}{\ell} 2 \mathrm{~g} \ell\left(1-\cos \theta_{\mathrm{m}}\right)=\mathrm{mg}\left(3-2 \cos \theta_{\mathrm{m}}\right)\)
\(\frac{\mathrm{T}_{\text {max }}}{\mathrm{T}_{\text {min }}}=3 \quad\) (given)
option (B) \(\mathrm{t}_{\text {max }}=\mathrm{mg}\left(3-2 \times \frac{3}{5}\right)=\mathrm{mg}\left(\frac{9}{5}\right)\)
option (C) \(\mathrm{v}_{\mathrm{m}}=\sqrt{2 \mathrm{~g}(2)\left(1-\frac{3}{5}\right)}=\sqrt{\frac{8 \mathrm{~g}}{5}}=3.96 \mathrm{~m} / \mathrm{s}\)
Two small masses m and M lie on a large horizontal frictionless circular track of radius R. The two masses are free to slide on the track but constrained to move along a circle. Initially the two masses are tied by a thread with a compressed spring between them (spring of negligible length being attached with none of the two masses). The compressed spring stores a potential energy \(\mathrm{U}_{0}\). At a certain time \(\mathrm{t}=0\) the thread is burnt and the two masses are released to run opposite to each other leaving the spring behind. The total mechanical energy remaining conserved. On the circular track the two masses make a head on perfectly elastic collision. Take \(\mathrm{M}=2 \mathrm{~m}\) for all calculation. Which of the following option(s) is /are correct ?
Ans. (a, b, c)

as \(\quad \mathrm{m}=\frac{\mathrm{M}}{2} \quad \therefore \mathrm{v}=2 \mathrm{~V}\)
(a.) \(\mathrm{Vt}+\mathrm{vt}=2 \pi \mathrm{R}\)
(b.) \(\frac{\mathrm{K}_{1}}{\mathrm{~K}_{2}}=\frac{\mathrm{M}}{\mathrm{m}}=\frac{2}{1} \quad \mathrm{~K}_{1}+\mathrm{K}_{2}=\mathrm{U}_{0}\)
(c.) \(\quad t=\frac{4 \pi R}{3 v}=\frac{4 \pi R}{3} \sqrt{\frac{3 m}{4 U_{0}}}=2 \pi R \sqrt{\frac{m}{3 U_{0}}}\)
(d.) as collision is elastic relative speed will be same after \(1{ }^{\text {st }}\) collision.
