CBSE Class 10 Science Question Paper 2025 Set 3 (31/6/3) with Solutions

Reading Time: 45 minutes

Last Updated on November 18, 2026 by XAM CONTENT

CBSE Class 10 Science Previous Year Paper

Practice the CBSE Class 10 Science Question Paper 2025 — Outside Delhi Set 3 (31/6/3) with complete section-wise answers and worked solutions. The paper contains 39 questions for 80 marks with internal choices in selected questions.

Paper Code
31/6/3
Maximum Marks
80
Time
3 Hours
Paper Pattern

Section A: Q1–20 (1 mark each) · Section B: Q21–26 (2 marks each) · Section C: Q27–33 (3 marks each) · Section D: Q34–36 (5 marks each) · Section E: Q37–39 (4 marks each). There is no overall choice; internal choice is provided in selected questions.

🧪
CBSE Science 2025 · 31/6/3

Section A — MCQs & Assertion–Reason

Questions 1–20 · 1 mark each
20
MCQ / A-R
🧪
Section A — MCQs & Assertion–Reason
Questions 1–20 · 1 mark each
1

Example of thermal decomposition reaction are

(i) \(2 \mathrm{AgCl} \rightarrow 2 \mathrm{Ag}+\mathrm{Cl}_{2}\)

(ii) \(\mathrm{CaCO}_{3} \rightarrow \mathrm{CaO}+\mathrm{CO}_{2}\)

(iii) \(2 \mathrm{H}_{2} \mathrm{O} \rightarrow 2 \mathrm{H}_{2}+\mathrm{O}_{2}\)

(iv) \(2 \mathrm{KClO}_{3} \rightarrow 2 \mathrm{KCl}+3 \mathrm{O}_{2}\)

[1 mark]
A

(i) and (ii)

B

(ii) and (iii)

C

(iii) and (iv)

D

(ii) and (iv)

Solution

Ans. (d)

Explanation: In these reactions, compounds are decomposed by heating.

2

You have three aqueous solutions A, B and C as given below:

A – Potassium nitrate

B – Ammonium chloride

C – Sodium carbonate

The ascending order of the pH of these solutions is:

[1 mark]
A\(\mathrm{A}<\mathrm{B}<\mathrm{C}\)
B\(\mathrm{B}<\mathrm{C}<\mathrm{A}\)
C\(\mathrm{C}<\mathrm{A}<\mathrm{B}\)
DB<A<C
Solution

Ans. (d)

Explanation: Ammonium chloride is acidic \((\mathrm{pH}<7)\)

Potassium nitrate is neutral \((\mathrm{pH}=7)\)

Sodium carbonate is basic ( \(\mathrm{pH}>7\) )

3

Which one of the following metals is protected from corrosion by a layer of its own oxide?

[1 mark]
A

Aluminium

B

Copper

C

Silver

D

Gold

Solution

Ans. (a)

Explanation: aluminium, when exposed to air, develops a thin layer of aluminium oxide \(\left(\mathrm{Al}_{2} \mathrm{O}_{3}\right)\) which acts as a protective layer against further corrosion.

4

The colour of the solution observed after about 1 hour of placing iron nails in copper sulphate solution is

[1 mark]
ABlue
BPale green
CYellow
DReddish brown
Solution

Ans. (b)

Explanation: \(\mathrm{Fe}+\mathrm{CuSO}_{4} \rightarrow \mathrm{FeSO}_{4}+\mathrm{Cu}\)

Iron (Fe) is more reactive than Copper (Cu), so it displaces copper and the blue colour of copper sulphate \(\left(\mathrm{CuSO}_{4}\right)\) is changed into pale green due to the formation of ferrous sulphate \(\left(\mathrm{FeSO}_{4}\right)\).

5

A hydrocarbon which does not belong to the same homologous series of carbon compounds is

[1 mark]
A\(\mathrm{C}_{4} \mathrm{H}_{10}\)
B\(\mathrm{C}_{6} \mathrm{H}_{14}\)
C\(\mathrm{C}_{7} \mathrm{H}_{14}\)
D\(\mathrm{C}_{10} \mathrm{H}_{22}\)
Solution

Ans. (c)

Explanation: Option a, b and d belong to alkanes with the general formula \(\mathrm{C}_{\mathrm{n}} \mathrm{H}_{2 \mathrm{n}+2}\) while option c belongs to alkenes with the general formula \(\mathrm{C}_{\mathrm{n}} \mathrm{H}_{2 \mathrm{n}}\).

6

The water of crystallisation is present in

(i) Bleaching Powder

(ii) Plaster of Paris

(iii) Washing Soda

(iv) Baking Soda

[1 mark]
A(ii) and (iv)
B(ii) and (iii)
C(i) and (iii)
D(i) and (iv)
Solution

Ans. (b)

Explanation: Water of crystallisation is present in Plaster of Paris- \(\mathrm{CaSO}_{4} \frac{1}{2} \mathrm{H}_{2} \mathrm{O}\) and Washing soda – \(\mathrm{Na}_{2} \mathrm{CO}_{3} .10 \mathrm{H}_{2} \mathrm{O}\)

7

Juice of tamarind turns blue litmus to red. It is because of the presence of a chemical compound called

[1 mark]
AAcetic acid
BMethanoic acid
COxalic acid
DTartaric acid
Solution

Ans. (d)

Explanation: The presence of tartaric acid in tamarind juice makes it acidic and thus changes the colour of blue litmus to red.

8

Electrical impulse travels in a neuron from

[1 mark]
A

Nerve ending → Axon → Cell body → Dendrite

B

Dendrite → Cell body → Axon → Nerve ending.

C

Cell body → Dendrite → Axon → Nerve ending

D

Dendrite → Axon → Nerve ending → Cell body

Solution

Ans. (b)

Explanation: In a neuron, the dendrites receive signals from other neurons or stimuli. This signal is then transmitted to the cell body (soma), where it is processed. If the signal is strong enough, it travels along the axon as an action potential. Finally, the impulse reaches the nerve endings (axon terminals), where it triggers the release of neurotransmitters to pass the signal to the next neuron or effector cell. This process ensures rapid communication within the nervous system.

9

A tall pea plant with round seeds (TTRR) is crossed with a short pea plant with wrinkled seeds (ttrr). The \(\mathrm{F}_{1}\) generation will be

[1 mark]
A25\% tall with round seeds
B50\% tall with wrinkled seeds
C75\% tall with wrinkled seeds
D100\% tall with round seeds
Solution

Ans. (d)

Explanation: Parent generation: TTRR (tall and round) x ttrr (short and wrinkled)

Gametes: TR × tr

\[\begin{array}{|l|l|l|} & TR & TR \\ tr & TtRr & TtRr \\ tr & TtRr & TtRr \\ \end{array}\]

\(\mathbf{F}_{\mathbf{1}}\) generation: 100\% TtRr (tall and round)

10

The basic filtration unit of the excretory system in human beings is:

[1 mark]
ANephron
BUrethra
CNeuron
DUrinary bladder
Solution

Ans. (a)

Explanation: The nephron is the functional unit of the kidney responsible for filtering blood and forming urine. The urethra is a tube that carries urine from the urinary bladder to the outside of the body. A neuron is a specialised cell that transmits electrical signals in the nervous system. The urinary bladder is a muscular sac that stores urine until it is excreted from the body.

11

Which one of the following is not an excretory product in plants?

[1 mark]
A

\(\mathrm{CO}_{2}\)

B

Starch

C

Resins and gums

D

Dead cells

Solution

Ans. (b)

Explanation: When plants produce glucose through photosynthesis, they use it immediately for energy or growth. Any excess glucose is converted into starch and stored in various parts of the plant, such as in the roots, tubers, seeds, or stems. Starch acts as an energy reserve that the plant can break down into glucose when needed, particularly during periods when photosynthesis is not occurring.

Plants release carbon dioxide as a by-product in the process of respiration. Other waste products of plants include tannins, alkaloids, resins, latexes, gums as well as the dead cells.

12

In human alimentary canal, the digestive juice secreted by the gastric glands are

[1 mark]
ABile, Trypsin, Pepsin
BHydrochloric acid, Pepsin, Mucus
CLipase, Bile, Mucus
DSalivary amylase, Pepsin, Bile
Solution

Ans. (b)

Explanation: The gastric glands secrete hydrochloric acid to aid digestion, pepsin for protein breakdown and mucus to protect the stomach lining. Bile is produced by the liver, not gastric glands. Lipase is secreted by the pancreas, not the gastric glands. Salivary amylase is secreted by salivary glands, not gastric glands.

13

The curvature of eye lens of human eye

[1 mark]
A

is fixed.

B

can be increased

C

can be decreased.

D

increases or decreases as the case may be.

Solution

Ans. (d)

Explanation: When looking at objects at different distances, the curvature of the human eye lens changes which is controlled by the ciliary muscles. When viewing distant objects, the muscles relax, lens curvature increases and while viewing nearby objects the muscles contract, lens curvature decreases and thus the image is focused on the retina.

14

Identify from the following the ray diagram which shows the correct path of the reflected ray for the ray incident on a concave mirror as shown:

CBSE Class 10 Science 2025 31/6/3 Question 14
[1 mark]
ACBSE Class 10 Science 2025 31/6/3 Question 14 option a
BCBSE Class 10 Science 2025 31/6/3 Question 14 option b
CCBSE Class 10 Science 2025 31/6/3 Question 14 option c
DCBSE Class 10 Science 2025 31/6/3 Question 14 option d
Solution

Ans. (c)

Explanation: According to the ray diagram for mirrors, ray parallel to the principal axis incident on a concave mirror, passes through focus after reflection.

15

In the following groups of wastes, which group contains only non-biodegradable wastes?

[1 mark]
A

Leather footwear, Plastic plate, Polythene bag

B

Empty medicine bottle, Milk packet, Aluminium can

C

Used tea leaves, Cardboard box, Iron nail

D

Plastic Syringes, Newspaper, Ball point pen

Solution

Ans. (b)

Explanation: The biodegradable wastes decompose through natural processes while the non-biodegradable wastes do not decompose easily by nature. Empty medicine bottles, milk packets and aluminium cans are examples of non-biodegradable wastes. Leather footwear, used tea leaves and newspaper are biodegradable wastes.

16

Consider the following food chain:

Grass → Grasshopper → Frog → Snake → Eagle

If the amount of energy available at third trophic level is 50 kJ, the available energy at the producer level was:

[1 mark]
A0.5 kJ
B5 kJ
C500 kJ
D5000 kJ
Solution

Ans. (d)

Explanation: In a food chain, energy decreases as it moves up trophic levels, typically following the 10\% energy transfer rule. This means that only about 10\% of the energy is passed on to the next level, while the rest is lost as heat or used for metabolism.

Given that the energy available at the third trophic level (Frog) is 50 kJ:

From the third trophic level (Frog) to the second (Grasshopper), the energy would be 50 kJ/0.1 = 500 kJ. From the second trophic level (Grasshopper) to the first (Grass), the energy would be 500 kJ / \(0.1=5000 \mathrm{~kJ}\). So, the available energy at the producer level (Grass) was 5000 kJ.

17

Assertion (A): Xylem tissue moves water and minerals obtained from the soil by the roots.

Reason (R): Xylem tissue is found only in the roots of a plant.

[1 mark]
ABoth Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion (A).
BBoth Assertion (A) and Reason (R) are true and Reason (R) is not the correct explanation of the Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (c)

Explanation: Xylem tissue is responsible for transporting water and dissolved minerals from the roots to other parts of the plant. Reason (R) is false. Xylem tissue is not only found in the roots. It is present throughout the plant, including in the stems and leaves, where it continues transporting water and minerals to various parts of the plant.

18

Assertion (A): Carbon and its compounds are our major sources of fuels.

Reason (R): Most of the carbon compounds on burning release a large amount of heat and light.

[1 mark]
ABoth Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion (A).
BBoth Assertion (A) and Reason (R) are true and Reason (R) is not the correct explanation of the Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (a)

Explanation: Carbon fuels like coal and oil are used because burning them releases a lot of energy. That energy, in the form of heat and light, makes them effective as our main power sources.

19

Assertion (A): Food web is a network of several food chains operating in an ecosystem.

Reason (R): Food web decreases the stability of an ecosystem.

[1 mark]
ABoth Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion (A).
BBoth Assertion (A) and Reason (R) are true and Reason (R) is not the correct explanation of the Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (c)

Explanation: Assertion (A) is true. A food web consists of multiple interconnected food chains within an ecosystem, where various species can be part of more than one food chain. It represents the complex feeding relationships in an ecosystem. Reason (R) is false. A food web increases an ecosystem’s stability because multiple interconnected food chains make the ecosystem more resilient to disturbances. If one food chain is disrupted, other chains can continue to function, helping maintain balance.

20

Assertion (A): In the common domestic circuits the earth wire is connected to a metallic plate buried deep inside the earth.

Reason (R): Earth wire ensures that any leakage of current to the metallic body of the appliance keeps its potential to that of the earth, so the user may not get a severe electric shock.

[1 mark]
ABoth Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion (A).
BBoth Assertion (A) and Reason (R) are true and Reason (R) is not the correct explanation of the Assertion (A).
CAssertion (A) is true, but Reason (R) is false.
DAssertion (A) is false, but Reason (R) is true.
Solution

Ans. (a)

Explanation: Earth wire is connected to a metallic plate buried deep inside the earth.

The potential of the earth is zero, so the potential of the earth wire also becomes zero. Thus, the assertion is true..

The metallic body of an electrical appliance is connected to this earth wire. Any accidental leakage current now gets an easy path to flow to the earth through this wire without flowing through the user’s body. Hence, the user does not get a shock. So, the reason is also true and it explains the assertion.

✍️
CBSE Science 2025 · 31/6/3

Section B — Very Short Answer

Questions 21–26 · 2 marks each
6
VSA
✍️
Section B — Very Short Answer
Questions 21–26 · 2 marks each
21

Name a metal found in the earth’s crust

(i) in free state and

(ii) in the form of its compound.

State where each of these metals are placed in the reactivity series of metals.

[2 marks]
Solution

(i) Platinum

(ii) Aluminium

Aluminium is present in the elements present at the top of the activity series while platinum is present at the bottom of the series.

22

Study the figure in which the path of a ray of light going from Medium 1 to Medium 2 is shown.

CBSE Class 10 Science 2025 31/6/3 Question 22

(a) Out of the two Media – Medium 1 and Medium 2, in which is the speed of light more?

(b) State reason of bending of the refracted ray away from the normal.

(c) Express refractive index of Medium 2 with respect to Medium 1 in terms of speed of light in two media.

[2 marks]
Solution

(a) Medium 2 is the rarer medium. Hence, the speed of light is higher in medium 2.

(b) Medium 2 is rarer compared to medium 1 and the speed of light in medium 2 is greater than in medium 1. Hence, the light ray in medium 2 bends away from the normal.

(c) If \(\mathrm{v}_{1}\) and \(\mathrm{v}_{2}\) are the speed of light in medium 1 and medium 2 respectively, then the refractive index of medium 2 w.r.t. medium 1 is \(v_{1} / v_{2}\).

23

(a) Give reasons:

(i) The sky appears dark to passengers flying at very high altitude.

(ii) ‘Danger’ signal lights are red in colour.

OR

(b) What is a rainbow? “We see a rainbow in the sky only after the rainfall.” Why?

[2 marks]
Solution

(a) (i) At very high altitudes, there is no atmosphere. Hence, no scattering takes place there.

So, the sky appears dark to passengers flying at very high altitudes.

(ii) Red colour has the longest wavelength in the visible range. Hence it scatters the least in the air and travels the farthest through fog and rain. Hence, it is used as a danger signal.

OR

(b) A rainbow is a natural optical phenomenon that appears as a multi-coloured arc in the sky, typically after a rainfall. It occurs when sunlight is refracted, at two points and reflected (total Internal reflection), and dispersed by water droplets in the atmosphere.

24

(a) “Proteins control the expression of various characters.” Explain this statement by taking an example of “tallness” as a characteristic in plants.

OR

(b) Explain the mechanism of inheritance used by sexually reproducing organisms to ensure the stability of DNA of the species.

[2 marks]
Solution

(a) Proteins are encoded by genes and play a crucial role in determining various traits. Proteins act as enzymes or assist in the formation of a hormone which in turn regulates a specific function. For example, in tall plants, the gene responsible for height produces a protein that regulates growth hormones, such as gibberellins, to control the plant’s growth and height.

(b) In sexually reproducing organisms, the process of gamete formation by meiosis followed by the fusion of gametes during fertilisation ensures DNA stability. During gamete formation by meiosis, each gamete receives one chromosome from each pair, either maternal or paternal. Upon fertilisation, the two gametes fuse, restoring the full set of chromosomes in the offspring. This mechanism preserves the integrity of the species’ DNA and ensures the transfer of genetic information to future generations.

25

(a) How is brain protected in our body?

(b) A doctor finds in one of his patients that he is not maintaining a proper posture and balance of his body. State the region of brain and also the part of brain which is responsible for it.

[2 marks]
Solution

(a) The brain is protected by the skull (cranium) and three protective layers known as meninges. Additionally, cerebrospinal fluid (CSF) acts as a cushion, protecting the brain from shocks.

(b) The hindbrain is the region of the brain responsible for maintaining posture and balance. Specifically, the cerebellum is part of the brain that controls body posture and balance.

26

Write the percentage of the energy of sunlight captured by green plants, to convert it into food energy. Explain the fate of this energy when green plants are eaten by primary consumers.

[2 marks]
Solution

Green plants capture only about 1% of the total sunlight energy that reaches them and convert it into food energy through photosynthesis. This energy is stored in the form of glucose, which serves as the plant’s food.

When primary consumers (herbivores) eat these plants, the energy stored in the plant is transferred to them. However, only a small fraction of this energy (around 10%) is passed on to the next trophic level (the primary consumer). The rest of the energy is lost in the form of heat, used for the consumer’s metabolic processes, or excreted as waste. This is why energy flow through the food chain is inefficient, and it decreases as it moves up the trophic levels.

📝
CBSE Science 2025 · 31/6/3

Section C — Short Answer

Questions 27–33 · 3 marks each
7
SA
📝
Section C — Short Answer
Questions 27–33 · 3 marks each
27

Explain why respiration is considered as an exothermic reaction. Give the chemical equation for this reaction.

[3 marks]
Solution

Respiration is considered an exothermic reaction because it releases energy in the form of heat. During respiration, glucose (or other organic molecules) is broken down in the presence of oxygen to produce carbon dioxide, water and energy. The energy released is used by the organism for various functions like movement, growth and maintaining body temperature.

The chemical equation for respiration is:

\[\mathrm{C}_{6} \mathrm{H}_{12} \mathrm{O}_{6}+6 \mathrm{O}_{2} \rightarrow 6 \mathrm{CO}_{2}+6 \mathrm{H}_{2} \mathrm{O}+\text{ Energy (ATP).}\]
28

(a) State the chemical property in each case on which the following uses of baking soda are based upon:

(i) as an anti-acids

(ii) as a constituent in making baking powder

(iii) in soda-acid fire-extinguishers

OR

(b) Write chemical equations to show what happens when an acid reacts with a

(i) metal

(ii) base and

(iii) carbonate

Write the name of the main product formed in each case.

[3 marks]
Solution

(a) (i) Baking soda is used as an antacid because of its alkaline nature. It readily neutralises excess acid present in the stomach.

(ii) alkaline nature

(iii) ability to react with acids to produce carbon dioxide gas

OR

(b) (i) \(\mathrm{Zn}+2 \mathrm{HCl} \rightarrow \mathrm{ZnCl}_{2}+\mathrm{H}_{2}\)

Main product is zinc chloride.

(ii) \(\mathrm{HCl}+\mathrm{NaOH} \rightarrow \mathrm{NaCl}+\mathrm{H}_{2} \mathrm{O}\)

Main product is sodium chloride (common salt).

(iii) \(\mathrm{Na}_{2} \mathrm{CO}_{3}+2 \mathrm{HCl} \rightarrow 2 \mathrm{NaCl}+\mathrm{H}_{2} \mathrm{O}+\mathrm{CO}_{2}\)

Main product is sodium chloride (common salt).

29

A student placed a candle flame at different distances from a convex lens and focused its image on a screen. He recorded his observation in tabular form as given below:

\[\begin{array}{|l|l|l|} S.No. & Distance of flame from the lens (cm) & Distance of the image from the lens \\ 1 & -90 & +18 \\ 2 & -60 & +20 \\ 3 & -40 & +24 \\ 4 & -30 & +30 \\ 5 & -24 & +40 \\ 6 & -20 & +60 \\ 7 & -18 & +90 \\ 8 & -12 & +120 \\ \end{array}\]

Analyse the observation table and on the basis of your analysis only, answer the following questions (without doing any calculations):

(a) What is the focal length of the convex lens used? Give reason to justify your answer.

(b) Which one of the sets of observations is not correct and why?

(c) Draw ray diagram to show image formation for any correct set of observation.

[3 marks]
Solution

(a) Focal length of the convex lens used is 15 cm.

Reason: From the observation no. 4 of the observation table,

Object distance = Image distance \(=30 \mathrm{~cm}\).

This is possible only when the object is placed at the centre of curvature.

So, the radius of curvature \(=\mathrm{R}=30 \mathrm{~cm}\).

Hence, the focal length of the lens \(=f=\mathrm{R} / 2=15 \mathrm{~cm}\).

(b) Observation no. 8 is not correct.

Reason 1: When the object distance is less than the focal length, then the image formed by a convex lens is virtual and appears on the same side as the object. Therefore, the image distance should also be negative.

Reason 2: In observation no. 8, the object distance is less than the focal length of the lens but the image distance is positive, i.e., a real image on the other side of the lens is formed. This cannot happen.

(c) Ray diagram corresponding to observation no. 4:

CBSE Class 10 Science 2025 31/6/3 Question 29 solution
30

(a) “In human beings the genes inherited from the parents decide whether the newborn individual is male or female.” Explain this statement with the help of a flow diagram.

(b) “Some animals rely on environmental cues for sex determination.” Justify this statement giving an example.

[3 marks]
Solution

(a) In humans, sex is determined by genetic inheritance. The genes passed down from the parents decide whether the offspring will be male or female. Humans have two sex chromosomes: X and Y. Males contribute an XY combination, while females contribute an XX combination. If a sperm carrying an X chromosome fertilises an egg with an X chromosome, the result will be a girl. If a sperm carrying a Y chromosome fertilises an egg with an X chromosome, the result will be a boy.

Flow Diagram:

CBSE Class 10 Science 2025 31/6/3 Question 30 solution

(b) Different species use various strategies to determine the sex of a newborn, which can either be influenced by environmental cues or genetically determined.

Environmental Cues: (a) In some animals, the temperature at which fertilised eggs are incubated determines whether the developing embryo becomes male or female. For example, in certain species of lizards, temperature plays a key role in sex determination, high incubation temperature results in male offspring in lizards. (b) In some animals, such as snails, individuals can change their sex in response to environmental stress or changes in their surroundings.

31

Name the blood vessel that brings (i) oxygenated blood (ii) deoxygenated blood, to the human heart. Also name that chamber of the heart which receives deoxygenated blood and state how deoxygenated blood from this chamber is sent to lungs for oxygenation.

[3 marks]
Solution

(i) Pulmonary Vein: It is the blood vessel that brings oxygenated blood to the human heart. It brings the blood from the lungs to the heart.

(ii) Vena Cava: It is the blood vessel that brings deoxygenated blood to the human heart. It brings the blood from all the body parts to the heart.

Chamber of the heart which receives the deoxygenated blood: Right atrium.

The deoxygenated blood from the right atrium enters the right ventricle through the tricuspid valve. The pulmonary artery carries deoxygenated blood from the right ventricle of the heart to the lungs for oxygenation. In the lungs, the blood is oxygenated and returns to the heart through the pulmonary veins.

32

A person uses lenses of power -0.5 D in his spectacles for the correction of his vision.

(a) Name the defect of vision the person is suffering from.

(b) List two causes of this defect.

(c) Determine the focal length of the lenses used in the spectacles.

[3 marks]
Solution

(a) Defect of vision: The defect of vision is myopia, also known as near-sightedness.

(b) Two causes of myopia:

  • Excessive length of the eyeball: When the eyeball is too long, the light entering the eye focuses before it reaches the retina, causing distant objects to appear blurry.
  • Too strong a curvature of the cornea or lens: If the lens or cornea is too curved, the light is focused in front of the retina instead of directly on it, resulting in blurred vision for distant objects.

(c) Focal length of the lens: The power (P) of a lens is related to its focal length (f) by the formula:

\[P=\frac{1}{F}\]

By rearranging the formula:

\[F=\frac{1}{P}\]

Here, f is the focal length of the lens in metres (m) Given that the power of the lens is -0.5 D, we can calculate the focal length \(f\) as follows:

\[f=\frac{1}{P}=\frac{1}{-0.5}=-2 \mathrm{~m}\]
33

(a) Explain the statement “Potential difference between two points is 1 volt”.

(b) What do the symbols given below represent in an electric circuit? Write one function of each.

CBSE Class 10 Science 2025 31/6/3 Question 33

(i)

CBSE Class 10 Science 2025 31/6/3 Question 33

(ii)

[3 marks]
Solution

(a) The potential difference between two points is 1V means that1 Joule of work is required to be done to move 1 Coulomb of charge from one point to the other.

(b) Symbol (i): It is the symbol of an ammeter. It is used to measure the current in a circuit.

Symbol (ii): It is the symbol of a variable resistor and used to control the flow of current in a circuit and hence the voltage across a certain component.

📘
CBSE Science 2025 · 31/6/3

Section D — Long Answer

Questions 34–36 · 5 marks each
3
LA
📘
Section D — Long Answer
Questions 34–36 · 5 marks each
34

(a) What are magnetic field lines? How is the direction of magnetic field at a point determined? Draw the pattern of magnetic field lines of the magnetic field produced by a current carrying circular loop. Mark on it the direction of (i) current and (ii) magnetic field lines. Name the two factors on which the magnitude of the magnetic field due to a current carrying coil depends.

OR

(b) Why can’t two magnetic field lines cross each other? Draw magnetic field lines showing the direction of the magnetic field due to a current carrying long straight solenoid. State the conclusion which can be drawn from the pattern of magnetic field lines inside the solenoid. Name any two factors on which the magnitude of the magnetic field due to this solenoid depends.

[5 marks]
Solution

(a) Magnetic field lines are the imaginary lines in a magnetic field, the tangent drawn at any point which gives the direction of the field at that point and its density gives the magnitude of the field.

The direction of a magnetic field at any point is determined by placing a small compass needle at that point, where the north pole of the needle will indicate the direction of the magnetic field.

Magnetic field produced by a current-carrying circular loop:

CBSE Class 10 Science 2025 31/6/3 Question 34 solution

Factors on which the magnitude of the magnetic field due to a current-carrying coil depends:

(i) Magnitude of the current, (ii) Number of turns in the coil.

OR

(b) Two magnetic field lines cannot cross each other because if they do so, then it indicates two directions of the same magnetic field at that point which is not possible.

Magnetic field lines due to a current-carrying long straight solenoid:

CBSE Class 10 Science 2025 31/6/3 Question 34 solution

Inside the solenoid, the field lies straight. Those are close and parallel to one another, indicating that the field inside the solenoid is very strong and uniform. Factors on which the magnitude of the magnetic field due to a current-carrying coil depends:

(i) Magnitude of the current, (ii) Number of turns per unit length in the solenoid.

35

(A) (a) Name the method by which Amoeba and Leishmania reproduce. Write a major difference in the way they divide to produce new individuals.

(b) What is asexual reproduction? Explain the process of budding in Hydra.

(c) Give two methods used to grow rose and jasmine plants by vegetative propagation.

OR

(B) (a) Write one function each of the parts – (i) petals (ii) anther (iii) style and (iv) ovary of a bisexual flower.

(b) Give one example each of a unisexual flower and a bisexual flower. Mention the changes which a flower undergoes after fertilisation.

[5 marks]
Solution

(A) (a) Method of reproduction in Amoeba and leishmania: Binary fission

Difference: In Amoeba, binary fission occurs randomly, with the cell dividing in any plane. In Leishmania, binary fission occurs in a fixed orientation relative to its whip-like flagellum, ensuring the daughter cells maintain proper positioning of the flagellum.

(b) Asexual reproduction: It is a type of reproduction where a single organism produces offspring without the fusion of gametes. The offspring are genetically identical to the parent. Common methods of asexual reproduction include binary fission, budding and fragmentation.

Budding in Hydra: In Hydra, a small bud develops as an outgrowth from the body of the parent. This bud gradually grows, eventually detaching from the parent to form a new individual. The new organism is genetically identical to the parent, making it an example of asexual reproduction.

(c) Methods of Vegetative Propagation in Rose and Jasmine Plants:

Cutting: In this method, a portion of the stem or branch is cut and planted in the soil. It grows into a new plant and commonly used in rose and jasmine propagation.

Layering: In this method, a branch or stem of the plant is bent to the ground and covered with soil while still attached to the parent plant. Over time, roots form at the buried part, and the new plant can be separated from the parent. This is also used for propagating rose and jasmine plants.

OR

(B) (a) Functions of each part of a bisexual flower:

(i) Petals: The petals attract pollinators such as insects, birds, or wind by being colourful and often fragrant, helping in the process of pollination.

(ii) Anther: The anther produces and releases pollen, which contains male gametes (sperm cells) required for fertilisation.

(iii) Style: The style is a tube-like structure that connects the stigma to the ovary, allowing the pollen tube to grow down to reach the ovule for fertilisation.

(iv) Ovary: The ovary contains the ovules, which are female gametes. After fertilisation, the ovary develops into the fruit and the ovules become seeds.

(b) Examples of unisexual and bisexual flowers

Unisexual flower example: Cucumber (male and female flowers are separate).

Bisexual flower example: Rose (has both male and female reproductive organs in the same flower).

Changes after fertilisation:

The ovule develops into a seed while the ovary develops into a fruit. The style and stigma typically wither away after fertilisation and the fertilised egg within the ovule becomes the embryo of the seed.

36

(a) Name an alcohol and a carboxylic acid having two carbon atoms in their structures. Draw their structures and state how this alcohol can be converted into a carboxylic acid. What happens when these two compounds react in the presence of an acid? Write chemical equations for the reactions involved in the two cases mentioned above.

OR

(b) What are soaps? Write the structure of a soap molecule. Explain the cleansing action of a soap. Why are soaps not considered suitable for washing clothes in a region where water is hard? How is this problem overcome?

[5 marks]
Solution

(a) Ethyl (Ethanol) Alcohol: \(\mathrm{C}_{2} \mathrm{H}_{5} \mathrm{OH}\)

Ethanoic acid: (Acetic acid) \(\mathrm{CH}_{3} \mathrm{COOH}\)

Alcohols can be converted to acetic acid by the oxidation process.

CBSE Class 10 Science 2025 31/6/3 Question 36 solution

The two compounds i.e., ethanoic acid or acetic acid and ethanol react to form ester – ethyl ethanoate.

CBSE Class 10 Science 2025 31/6/3 Question 36 solution

OR

(b) The sodium or potassium salts of the long-chain carboxylic acids are referred to as soaps. It consists of a long hydrocarbon chain having carboxylic acid on one end. This has an ionic bond with metal ions which is usually sodium or potassium.

Structure of soap:

CBSE Class 10 Science 2025 31/6/3 Question 36 solution

This is the structure of the soap molecule – sodium stearate. It has a hydrophilic and hydrophobic part in it. The hydrophobic end is non-polar and insoluble in water. In the above molecule, the hydrophobic part is – \(\mathrm{C}_{17} \mathrm{H}_{35}\). The hydrophilic end is polar and soluble in water. In the molecule, the hydrophilic end is – COONa.

Micelles is the name of soap molecules. The hydrophobic end is attached to the dust, oil, grease, dirt or materials which we want to remove, detaching takes place, gets suspended in water and can easily be removed.

When dirt is put in water containing soap, then the non-polar end of soap in a micelle attaches to an oil particle present on the surface of the dirt. The soap micelles trap the oily particles by the non-polar end. The polar end attaches to the water when the dirt is agitated in soap solution.

Soaps cannot be used in hard water because of its tendency to form precipitates with the calcium and magnesium salts which are present in hard water. This formation of precipitate results in prevention of the formation of lather in soap water.

To overcome this problem detergents can be used which are ammonium or sulphonate salts of fatty acids.

🧠
CBSE Science 2025 · 31/6/3

Section E — Case / Source Based

Questions 37–39 · 4 marks each
3
Case-Based
🧠
Section E — Case / Source Based
Questions 37–39 · 4 marks each
37

Many pure metals like copper, iron and gold are very soft and as such are considered unsuitable for certain uses. Metallic objects around us such as cooking utensils, statues, ornaments, guns, etc. are actually not made up of pure metals. Instead of pure metals, alloys are used in the design of most of the useful objects. Making alloys enhances the basic properties of a metal which is the primary constituent (metal) of an alloy.

(I) How does electrical conductivity and melting point of a metal change when it is converted to its alloy by mixing a small amount of an element in it?

(II) Name an alloy used for welding two wires together in an electric circuit. Write its major constituents.

(III) (a) What are alloys? How is ‘Brass’ (an alloy) prepared?

OR

(III) (b) What is stainless steel? How is it prepared? Write one important property which makes it more useful in making cooking utensils as compared to its primary metal.

[4 marks]
Solution

(I) An alloy generally has a lower melting point and lower electrical conductivity compared to its constituent metals.

(II) Soldering wire is an alloy of lead and tin which is used to join electrical wires in an electric circuit.

(III) (a) An alloy is a combination of two or more metals or a metal and a nonmetal. Brass is an alloy of copper and zinc.

OR

(III) (b) Stainless steel is a corrosion-resistant alloy of iron, chromium and nickel. It is made by melting iron, chromium and nickel in an electric furnace.

Stainless steel is more useful for making cooking utensils because it has excellent properties like corrosion resistance, durability and non-reactive nature with food.

38

The growth movements of plant parts in which the direction of the stimulus determines the direction of the response is known as tropic movements or tropism. Plants also have non-directional movements which may not be growth dependent.

CBSE Class 10 Science 2025 31/6/3 Question 38

(I) Name the movement which causes ‘ X ‘ and Y to grow downwards and upwards respectively. (Refer above figure)

(II) Write the name of a hormone that plays a major role in (i) falling of leaves (ii) rapid cell division

(III) (a) Leaves of the sensitive plant move very quickly in response to ‘touch’. How is this stimulus of touch communicated and explain how the movement takes place.

OR

(III) (b) Name the plant hormone which is synthesised at the shoot tip. How does this hormone help the plant to bend towards light?

[4 marks]
Solution

(I) X: Positive geotropism

Y: Negative geotropism

(II) (i) Hormone responsible for falling of leaves: Abscisic Acid (ABA).

(ii) Hormone responsible for cell division: Cytokinin

(III) (a) Leaves of Mimosa pudica are sensitive. When touched the stimulus reaches the base of the leaf and the water in the vacuoles of the cells of the leaf loses water to the adjacent cell. All the water escapes the leaf which then becomes flaccid. This causes the leaves to close due to the passing of impulse which changes turgor pressure. Owing to this stimulus, the turgor of the lower half of the pulvinus is lost and the leaf droops down.

The stimulus is transmitted as an action potential from a stimulated leaflet to the leaflet’s swollen base, and from there to the pulvini of the other leaflets, which run along the length of the leaf’s rachis. The action potential then passes into the petiole, and finally to the large pulvinus at the end of the petiole, where the leaf attaches to the stem.

OR

(III) (b) Plant growth hormone synthesised in shoot tips: Auxin.

During the presence of sunlight, the auxins in the stem start moving toward the area that is away from light. Thus, the auxin concentration in this region increases due to which growth takes place. Whereas the area of low auxin concentration exhibits no growth. This results in the bending of the stem towards sunlight.

39

Study the circuit shown in which two resistors X and Y of resistances \(3 \Omega\) and \(6 \Omega\) respectively are joined in series with a battery of 2 V.

CBSE Class 10 Science 2025 31/6/3 Question 39

(I) Draw a circuit diagram showing the above two resistors X and Y joined in parallel with same battery and same ammeter and voltmeter.

(II) In which combination of resistors will the (i) potential difference across X and Y and (ii) current through X and Y, be the same?

(III) (a) Find the current drawn from the battery by the series combination of the two resistors (X and Y).

OR

(III) (b) Determine the equivalent resistance of the parallel combination of the two resistors (X and Y).

[4 marks]
Solution

(I)

CBSE Class 10 Science 2025 31/6/3 Question 39 solution

(II) (i) When the resistors are connected in parallel, then the potential difference across

X and Y for both the resistors will be the same.

(ii) When the resistors are connected in series, then the current through both the resistors connected across X and Y will be the same.

(III) (a) In the series combination, the current drawn

\[(\mathrm{I})=\frac{V}{\mathrm{R}_{1}+\mathrm{R}_{2}}=\frac{2}{3+6}=\frac{2}{9} \mathrm{~A}\]

OR

(III) (b) In parallel combination, the equivalent resistance

\[(\mathrm{R})=\frac{\mathrm{X} \times \mathrm{Y}}{\mathrm{X}+\mathrm{Y}}=\frac{3 \times 6}{3+6}=2 \Omega\]

Scroll to Top